How To Unbrick OnePlus 13R models (CPH2645 firmware, CPH2691 firmware, CPH2647 firmware)

using the firmware (flash file), follow this procedure to resolve various software issues. This firmware can address problems such as being stuck on the logo screen, FRP reset, issues with Fastboot Mode, bootloop (Lost Fastboot – Lost Recovery), stuck in EDL mode (black screen), or a white screen after flashing, as well as the device being unresponsive after flashing.

Prerequisites for Unbricking the OnePlus 13R

Before starting the unbricking process, make sure you have the following:

• MSM Tool: The official Mobile Software Management tool from OnePlus. You can download this from official OnePlus sources or authorized distributors. Ensure you use the correct version for the OnePlus 13R.
• A Windows PC: The MSM Tool is designed to run on Windows computers, so a PC running Windows 7 or later is required.
• USB Cable: A high-quality USB cable to connect the OnePlus 13R to the PC.
• Battery Charged Above 10%: Ensure the OnePlus 13R has sufficient battery charge. If the device is completely powered off or bricked, this step is less critical, but it is still advised to avoid interruptions during the process.
• Qualcomm Drivers: These drivers are necessary for enabling communication between the OnePlus 13R and the PC. Make sure to install them before proceeding.
• Firmware for OnePlus 13R: The appropriate firmware files for the device. If necessary, download the correct firmware from trusted sources or official OnePlus support channels.

Step-by-Step Process for Unbricking the OnePlus 13R Using the MSM Tool

1. Download and Install the MSM Tool
   Begin by downloading the MSM Tool that is compatible with the OnePlus 13R. After downloading, extract the zip file to a folder on your PC.
2. Install Qualcomm USB Drivers
   • Open Device Manager on your Windows PC.
   • Right-click the Start Menu and select Device Manager.
   • Look for your OnePlus 13R listed under “Ports” or “Other devices” as an Unknown Device.
   • Right-click it, select Update Driver, and install Qualcomm USB drivers. You can download these drivers from trusted sources such as Qualcomm’s website.
3. Boot OnePlus 13R into EDL (Emergency Download Mode)
   OnePlus devices must be in EDL mode to communicate with the MSM Tool. To enter EDL mode:
   • Power off the OnePlus 13R completely.
   • Hold the Volume Up button and connect the device to the PC using a USB cable.
   • Once connected, the device should automatically enter EDL mode, and the MSM Tool should detect the phone.
4. Launch the MSM Tool
   After successfully connecting the OnePlus 13R in EDL mode, open the MSM Tool that you downloaded earlier. The interface should detect the connected device. If the device is not detected, ensure that the Qualcomm drivers are correctly installed and try again.
5. Start the Unbricking Process
   In the MSM Tool interface, click the Start or Download button to begin the unbricking process. The tool will begin flashing the firmware to the OnePlus 13R, which may take a few minutes, depending on the computer’s speed and the device.
6. Wait for the Process to Complete
   The MSM Tool will display progress as percentages. Be patient and avoid disconnecting the device during the flashing process. Interrupting the process prematurely may result in further bricking or system software corruption.
7. Reboot the Device
   Once the MSM Tool shows that the process is complete, safely disconnect the OnePlus 13R from the PC. The device should now boot into the operating system and be free from the bricked condition. If the device does not boot immediately, give it a few more minutes.

Troubleshooting

• Device Not Entering EDL Mode: If the OnePlus 13R isn’t entering EDL mode, check the steps again or try using a different USB cable or port.
• MSM Tool Doesn’t Detect Device: Ensure that the Qualcomm drivers are correctly installed. Restarting both the PC and the OnePlus 13R may also resolve the issue.
• Flashing Fails: If the flashing process fails midway, repeat the steps or try a different firmware version. It may also help to perform a factory reset after the device is unbricked.

Firmware Download to Unbrick OnePlus 13R

Variants: CPH2645 firmware / CPH2647 firmware

CPH2645 EU Firmware – Download from Here

CPH2647 NA Firmware – Download from Here

Tools

This is a Paid tool authorization is required.

Password: mgunlock.com

You can use our service below to unbrick OnePlus 13R

Contact Us on Telegram from here or WhatsApp from here If you need help.

Qualcomm, MTK platform – USB driver installation

• Download the driver file From Here
• Double-click to install (the default path does not need to be changed)
• Pop up a security window (always allow installation)
• Select restart the computer now
• Complete

How To Unbrick OnePlus 13R – MGUNLOCK.COM

How to reboot EDL

1. Connect one end of the USB cable to your PC.
2. Then connect the other end to your device.
3. Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)

How to Unbrick OnePlus 13R

1. Download, Extract ROM File & tool in same folder
2. Qualcomm_Drivers_QDLoader driver on your computer
3. Login OplusFlashTool.exe

1. Select Firmware
2. Click “Start” button
3. Conect Phone to PC, Enter EDL Mode
4. Wait until success, once done. Unplug device and switch it ON >>>Done All

OnePlus 13R CPH2645/CPh2691/CPH2647 Unbrick Service

20$

1. Order Service

2. Download Ultraviewer from Here

3. send Order Number + Ultraviewer id and password To Us Via Telegram or WhatsApp
   

OnePlus 13R CPH2645/CPh2691/CPH2647 Unbrick Service quantity

Add to cart

Category: Oneplus

• Description
• Reviews (0)

OnePlus 13R Unbrick Service

OnePlus 13R CPH2645/CPh2691/CPH2647 Firmware’s

CPH2645 EU Firmware – Download from Here

 

CPH2647 NA Firmware – Download from Here

 

CPh2691 IN Firmware – Download Coming Soon

Stock ROM Firmware (Flash File): This firmware allows you to address a range of software-related issues on your OnePlus 13R CPH2645/CPh2691/CPH2647 Unbrick. It can resolve problems such as being stuck on the logo, FRP reset, Fastboot mode failures, bootloop errors (Lost Fastboot – Lost Recovery), EDL mode freeze (black screen), white screen following a flash, or the device being unresponsive after flashing.

How to OnePlus 13R CPH2645/CPh2691/CPH2647 Unbrick

1. Extract The ROM File & tool in same folder
2. Install Qualcomm_Drivers_QDLoader driver on your computer
3. Login OplusFlashTool.exe

1. Select Firmware
2. Click “Start” button

3. 

4. Conect Phone to PC, Enter EDL Mode

5. 

6. Wait until success, once done. Unplug device and switch it ON >>>Done All

Qualcomm, MTK platform – USB driver installation

• Download the driver file for OnePlus 13R unbrick From Here
• Double-click to install (the default path does not need to be changed)
• Pop up a security window (always allow installation)
• Select restart the computer now
• Complete

How to reboot EDL

1. Connect one end of the USB cable to your PC.
2. Then connect the other end to your device.
3. Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see Qualcomm 9008 appear in device manager) Following those steps will make OnePlus 13R Unbrick easier.
   
   
4. 

         

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

• 

  OnePlus 11R/ace 2 Unbrick Service

  20$ Add to cart
• 

  OnePlus Pad Pro OPD2404 Unbrick service

  20$ Add to cart
• 

  OnePlus Ace Pro/10T Unbrick Service

  Rated 5.00 out of 5
  20$ Add to cart