How to Unbrick OnePlus Ace 3 Pro – PJX110 Firmware (Flash File)
Restore your OnePlus Ace 3 Pro to full functionality with the official stock firmware. This flash file is designed to resolve a range of software issues, including boot loops, FRP lock, Fastboot mode errors, lost recovery, black screen in EDL mode, white screen after flashing, and even devices that appear dead. Get your device back up and running smoothly with a seamless firmware installation.
Table of Contents
Prerequisites for Unbricking the OnePlus Ace 3 Pro
Before starting the unbricking process, ensure you have the following:
- MSM Tool: The official Mobile Software Management tool from OnePlus. Obtain it from official OnePlus sources or authorized distributors. Ensure you’re using the correct version specific to the OnePlus Ace 3 Pro.
- A Windows PC: The MSM Tool runs exclusively on Windows (Windows 7 or later).
- USB Cable: A high-quality USB cable to connect your OnePlus Ace 3 Pro to the PC.
- Battery Charged Above 10%: While not always necessary, keeping your device charged helps prevent interruptions.
- Qualcomm Drivers: Essential for proper communication between the device and the PC. Install these before proceeding.
- Firmware for OnePlus Ace 3 Pro: The correct stock ROM firmware for your specific model. Download it from trusted sources or OnePlus support channels.
Step-by-Step Guide to Unbrick OnePlus Ace 3 Pro Using MSM Tool
1. Download and Install the MSM Tool
Start by downloading the MSM Tool compatible with the OnePlus Ace 3 Pro. Once downloaded, extract the ZIP file to a folder on your PC.
2. Install Qualcomm USB Drivers
- Open Device Manager on your Windows PC.
- Right-click the Start Menu, then select Device Manager.
- Locate Unknown Device or OnePlus Ace 3 Pro under the “Ports” or “Other Devices” section.
- Right-click it, select Update Driver, and install Qualcomm USB drivers. You can download these from trusted sources like the Qualcomm website.
3. Boot OnePlus Ace 3 Pro into EDL (Emergency Download Mode)
The MSM Tool requires the device to be in EDL mode to proceed with flashing. Follow these steps:
- Power off the OnePlus Ace 3 Pro completely.
- Hold down the Volume Up button and connect the phone to the PC using a USB cable.
- Once connected, the device should enter EDL mode, and the MSM Tool should detect the phone automatically.
4. Launch the MSM Tool
- After successfully connecting the OnePlus Ace 3 Pro in EDL mode, open the MSM Tool you downloaded earlier.
- The tool should detect your connected device. If it’s not detected, verify that the Qualcomm drivers are correctly installed and try again.
5. Start the Unbricking Process
- In the MSM Tool interface, locate the Start or Download button and click it to initiate the flashing process.
- The tool will begin flashing the firmware to your OnePlus Ace 3 Pro. This process may take a few minutes, depending on your computer’s performance and the device itself.
6. Wait for the Process to Complete
- The MSM Tool will show a progress percentage during flashing.
- Do not disconnect your device during this process, as it may cause further software corruption.
7. Reboot the Device
- Once the MSM Tool confirms that the flashing is complete, safely disconnect your OnePlus Ace 3 Pro from the PC.
- Your device should now boot into the operating system, fully unbricked.
- If the device doesn’t boot immediately, allow a few minutes for initialization.
Troubleshooting Tips
- Device Not Entering EDL Mode?
- Double-check the steps and try a different USB cable or port.
- MSM Tool Doesn’t Detect the Device?
- Ensure that Qualcomm drivers are installed properly. Restart both the PC and the OnePlus Ace 3 Pro, then try again.
- Flashing Fails Mid-Process?
- Retry the procedure or use a different firmware version.
- If the issue persists, perform a factory reset after unbricking.
Firmware Download to Unbrick OnePlus Ace 3 Pro
China Version – PJX110 Firmware
PJX110domestic_11_14.1.0.202CN01_2024060103480000 Download
Tools
This is a Paid tool authorization is required.
Password: mgunlock.com
You can use our service below to unbrick OnePlus Ace 3 Pro
Contact Us on Telegram from here or WhatsApp from here If you need help.
Qualcomm, MTK platform – USB driver installation
- Download the driver file From Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete
How to Unbrick OnePlus Ace 3 Pro -MGUNLOCK.COM
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)
How to Unbrick OnePlus Ace 3 Pro -MGUNLOCK.COM
How to Unbrick OnePlus Ace 3 Pro
How to Unbrick OnePlus Ace 3 Pro -MGUNLOCK.COM
- Download, Extract ROM File & tool in same folder
- Qualcomm_Drivers_QDLoader driver on your computer
- Login OplusFlashTool.exe
- Select Firmware
- Click “Start” button
- Conect Phone to PC, Enter EDL Mode
- Wait until success, once done. Unplug device and switch it ON >>>Done All
OnePlus Ace 3 Pro Unbrick Service
20$
OnePlus Ace 3 Pro Unbrick Service PJX110 Stock ROM Firmware (Flash File) can be used to resolve various software-related issues on your OnePlus Ace 3 Pro. This includes problems such as being stuck on the logo, FRP reset, resolving Fastboot mode issues, bootloop (lost Fastboot – lost Recovery), EDL mode (black screen), white screen after flashing, or device failure following a flash, among others.
- Download the driver file for OnePlus Ace 3 Pro Unbrick from Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see Qualcomm 9008 appear in device manager)
1 review for OnePlus Ace 3 Pro Unbrick Service
Only logged in customers who have purchased this product may leave a review.
Related products
-
Oneplus Nord N30 Unbrick service
20$ – 25$ Select options This product has multiple variants. The options may be chosen on the product page -
OnePlus 12R/Ace 3 Unbrick Service
20$ Add to cart -
OnePlus Ace 3V/Nord 4 Unbrick Service
15$ Add to cart
melia –
all is good professional guy.