How to Unbrick OnePlus Ace 2V/Nord 3 5G PHP110, CPH2491, CPH2493 Stock Firmware ROM Flash File

How to Unbrick OnePlus Ace 2V/Nord 3 5G – PHP110 firmware CPH2491 firmware CPH2493 firmware (Flash File).
Restore your OnePlus Ace 2V/Nord 3 5G to full functionality with the official stock firmware. This flash file is designed to resolve a variety of software issues, including boot loops, FRP lock, Fastboot mode errors, lost recovery, black screen in EDL mode, white screen after flashing, and even devices that appear unresponsive or dead. Perform a seamless firmware installation to get your device back to optimal performance.
Table of Contents
Prerequisites for Unbricking the OnePlus Ace 2V/Nord 3 5G
Before proceeding with the unbricking process, ensure you have the following:
- MSM Tool: The official Mobile Software Management tool from OnePlus. Download it from official OnePlus sources or authorized distributors. Ensure you have the correct version specific to the OnePlus Ace 2V/Nord 3 5G.
- A Windows PC: The MSM Tool is designed for Windows (Windows 7 or later).
- USB Cable: A high-quality USB cable to connect your OnePlus Ace 2V/Nord 3 5G to the PC.
- Battery Charged Above 10%: While not mandatory, keeping your device charged helps prevent interruptions.
- Qualcomm Drivers: These drivers are essential for enabling communication between your device and PC. Install them before proceeding.
- Firmware for OnePlus Ace 2V/Nord 3 5G: Ensure you have the correct stock firmware for your model. Download it from trusted sources or official OnePlus support channels.
Step-by-Step Guide to Unbrick OnePlus Ace 2V/Nord 3 5G Using MSM Tool
1. Download and Install the MSM Tool
- Download the MSM Tool compatible with the OnePlus Ace 2V/Nord 3 5G.
- Extract the ZIP file to a folder on your PC.
2. Install Qualcomm USB Drivers
- Open Device Manager on your Windows PC.
- Right-click the Start Menu, then select Device Manager.
- Look for Unknown Device or OnePlus Ace 2V/Nord 3 5G under the “Ports” or “Other Devices” section.
- Right-click it, select Update Driver, and install Qualcomm USB drivers from a trusted source like the Qualcomm website.
3. Boot OnePlus Ace 2V/Nord 3 5G into EDL (Emergency Download Mode)
To communicate with the MSM Tool, the device must be in EDL mode:
- Power off the OnePlus Ace 2V/Nord 3 5G completely.
- Hold down the Volume Up button and connect the phone to the PC using a USB cable.
- Once connected, the device should enter EDL mode, and the MSM Tool should detect it automatically.
4. Launch the MSM Tool
- Open the MSM Tool that you downloaded earlier.
- The interface should detect your connected device.
- If the tool does not recognize your device, verify that the Qualcomm drivers are correctly installed and try again.
5. Start the Unbricking Process
- Click on the Start or Download button in the MSM Tool to begin flashing.
- The tool will now start flashing the firmware to your OnePlus Ace 2V/Nord 3 5G.
- This process may take several minutes, depending on your computer’s speed.
6. Wait for the Process to Complete
- The MSM Tool will display progress in percentage.
- Do not disconnect your device until the process is fully complete, as doing so may cause further software corruption.
7. Reboot the Device
- Once the MSM Tool confirms that the flashing process is complete, safely disconnect your OnePlus Ace 2V/Nord 3 5G from the PC.
- Your device should now boot into the operating system, fully unbricked.
- If it doesn’t boot immediately, give it a few minutes to initialize.
Troubleshooting Tips
- Device Not Entering EDL Mode?
- Double-check the steps and try a different USB cable or port.
- MSM Tool Doesn’t Detect the Device?
- Ensure that Qualcomm drivers are installed correctly. Restart both the PC and your OnePlus Ace 2V/Nord 3 5G, then try again.
- Flashing Fails Mid-Process?
- Retry the procedure or use a different firmware version.
- If the issue persists, perform a factory reset after unbricking.
Firmware Download to Unbrick OnePlus Ace 2V/Nord 3
China Version PHP110 firmware
PHP110domestic_11_A.05_2023022300470179.zip: Download
Global Variants CPH2491 firmware / CPH2493 firmware
CPH2491export_11_A.11_2023073123440130.zip: Download
CPH2493GDPR_11_A.10_2023070715280113.zip: Download
Tools
This is a Paid tool authorization is required.
Password: mgunlock.com
You can use our service below to unbrick OnePlus Ace 2V/Nord 3
Contact Us on Telegram from here or WhatsApp from here If you need help.
Qualcomm, MTK platform – USB driver installation
- Download the driver file From Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete

How to Unbrick OnePlus Ace 2V/Nord 3
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)

How to Unbrick OnePlus Ace 2V/Nord 3
How to Unbrick OnePlus Ace 2V/Nord 3

How to Unbrick OnePlus Ace 2V/Nord 3
- Download, Extract ROM File & tool in same folder
- Qualcomm_Drivers_QDLoader driver on your computer
- Login OplusFlashTool.exe
- Select Firmware
- Click “Start” button
- Conect Phone to PC, Enter EDL Mode
- Wait until success, once done. Unplug device and switch it ON >>>Done All
OnePlus Ace 2V/Nord 3 Unbrick Service
15$
OnePlus Ace 2V/Nord 3 Unbrick Service 5G PHP110, CPH2491, CPH2493 Stock Firmware ROM (Flash File) allows you to resolve various software issues on your OnePlus Ace 2V PHP110. This includes problems like being stuck on the logo, FRP reset, fixing Fastboot Mode issues, BootLoop (Lost Fastboot – Lost Recovery), EDL mode (black screen), white screen after flashing, or device failure post-flashing.
- Download the driver file for OnePlus Ace 2V/Nord 3 Unbrick From Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)
2 reviews for OnePlus Ace 2V/Nord 3 Unbrick Service
Only logged in customers who have purchased this product may leave a review.
Xavier –
great service fast respond and most important patient i had some issues with the drivers will use again if needed.
Jayden –
if you put the firmware in here is better than sending it after we contact you the service itself is excellent and fast.