unbrick oneplus
How to Unbrick OnePlus 10 Pro – NE2210, NE2211, NE2213, NE2215, NE2217 Stock ROM Firmware (Flash File)
How to Unbrick OnePlus 10 Pro
Want to revive your OnePlus 10 Pro 5G (NE2210 Firmware, NE2213 Firmware, NE2215 Firmware, NE2211 firmware NE2217 Firmware)? Flash the stock ROM firmware to fix all software issues and get it back to life. This flash file can help you solve problems like logo freezes, FRP resets, Fastboot Mode hang-ups, bootloops (Lost Fastboot – Lost Recovery), black screen or white screen after flashing, and even dead devices. Get your OnePlus back in action!
Table of Contents
Prerequisites for Unbricking the OnePlus 10 Pro
Before diving into the process, ensure that you have the following:
- MSM Tool: The official Mobile Software Management tool from OnePlus. You can get this from official OnePlus sources or authorized distributors. It’s crucial to use the correct version specific to the OnePlus 10 Pro.
- A Windows PC: The MSM Tool is designed to run on Windows computers, so you’ll need a reliable PC running Windows 7 or later.
- USB Cable: A good-quality USB cable to connect the OnePlus 10 Pro to the PC.
- Battery Charged Above 10%: It’s best to ensure that the OnePlus 10 Pro has sufficient battery charge. If the phone is completely powered off or bricked, this is less critical, but it helps to prevent interruptions during the process.
- Qualcomm Drivers: These are essential for enabling communication between the OnePlus 10 Pro and the computer. Install them before proceeding.
- Firmware for OnePlus 10 Pro: The correct firmware files for the device. If necessary, download the correct firmware package from trusted sources or OnePlus support channels.
Step-by-Step Process for Unbricking the OnePlus 10 Pro Using the MSM Tool
- Download and Install the MSM Tool
Start by downloading the MSM Tool compatible with the OnePlus 10 Pro. Once downloaded, extract the zip file to a folder on your PC. - Install Qualcomm USB Drivers
- Go to the Device Manager on your Windows PC.
- Right-click the Start Menu, then select Device Manager.
- Look for Unknown Device or your OnePlus 10 Pro under the “Ports” or “Other devices” section.
- Right-click it, select Update Driver, and install Qualcomm USB drivers. You can download the drivers from trusted sources like the Qualcomm website.
- Boot OnePlus 10 Pro into EDL (Emergency Download Mode)
OnePlus devices need to be in EDL mode to communicate with the MSM Tool. Here’s how to put your OnePlus 10 Pro into EDL mode:
- Power off the OnePlus 10 Pro completely.
- Hold down the Volume Up button and connect the phone to the PC using a USB cable.
- Once connected, the device should enter EDL mode, and the MSM Tool should detect the phone automatically.
- Launch the MSM Tool
After successfully connecting the OnePlus 10 Pro in EDL mode, open the MSM Tool you downloaded earlier. You should see an interface that detects your connected device. If it’s not detected, ensure that the Qualcomm drivers are correctly installed and try again. - Start the Unbricking Process
In the MSM Tool interface, you will see the Start or Download button. Click on it to begin the unbricking process.
The tool will start flashing the firmware to the OnePlus 10 Pro. This may take a few minutes, depending on the speed of your computer and the device. - Wait for the Process to Complete
During the flashing process, the MSM Tool will display progress in percentages. Be patient and do not disconnect the device during the process. Disconnecting the device prematurely may lead to further bricking or corruption of the system software. - Reboot the Device
Once the MSM Tool displays a message indicating the process is complete, you can safely disconnect the OnePlus 10 Pro from the PC. The device should now boot into the operating system, free from the bricked condition. If the device doesn’t boot immediately, a few more minutes of waiting may be needed.
Troubleshooting
- Device Not Entering EDL Mode: If the OnePlus 10 Pro isn’t entering EDL mode, double-check the steps or try using a different USB cable or port.
- MSM Tool Doesn’t Detect Device: Ensure that Qualcomm drivers are installed properly. Sometimes, restarting both the PC and the OnePlus 10 Pro can help.
- Flashing Fails: If the flashing fails mid-process, repeat the procedure or try a different firmware version. It may also help to perform a factory reset after unbricking.
Firmware Download to Unbrick OnePlus 10 Pro
China Version
NE2210domestic_11_C.57_2023062816370118.zip Download from Here
Global Variants:
NE2211
NE2211export_11_13.1.0.597EX01_2023101122280127.zip: Download | Sever 2
NE2213
NE2213GDPR_11_A.15_2022062303460000.zip: Download
NE2215/NE2211
NE2215export_11_A.14_2022051701530552.zip: Download
NE2217
NE2217export_11_A.08_2022091303210205.zip: Download
Tools
This is a Paid tool authorization is required.
Password: mgunlock.com
You can use our service below to unbrick OnePlus 10 Pro
Contact Us on Telegram from here or WhatsApp from here If you need help.
Qualcomm, MTK platform – USB driver installation
- Download the driver file From Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see qualcomm 9008 appear in device manager)
How to Unbrick OnePlus 10 Pro
- Download, Extract ROM File & tool in same folder
- Qualcomm_Drivers_QDLoader driver on your computer
- Login OplusFlashTool.exe
- Select Firmware
- Click “Start” button
- Conect Phone to PC, Enter EDL Mode
- Wait until success, once done. Unplug device and switch it ON >>>Done All
OnePlus 10 pro Unbrick Service
20$
Oneplus 10 pro Unbrick Service OnePlus 10 pro Unbrick Service NE2210, NE2213, NE2215, NE2217 Stock ROM Firmware (Flash File). By using this firmware, you can solve all software issues within your OnePlus 10 Pro 5G, such as hanging on the logo, FRP reset, fixing stuck Fastboot Mode, bootloop (Lost Fastboot – Lost Recovery), stuck EDL (black screen), or white after flashing, dead after flashing, etc. Qualcomm, MTK platform – USB driver installation
- Download the driver file From Here
- Double-click to install (the default path does not need to be changed)
- Pop up a security window (always allow installation)
- Select restart the computer now
- Complete
How to reboot EDL
- Connect one end of the USB cable to your PC.
- Then connect the other end to your device.
- Now press and hold the Volume Up, Volume Down. after the software launches, remove your hands (or when you see Qualcomm 9008 appear in device manager
4 reviews for OnePlus 10 pro Unbrick Service
Only logged in customers who have purchased this product may leave a review.
Related products
Marselo –
super fast
Evelyn –
The process was surprisingly straightforward, the only thing i did is downloading the correct firmware for my 10 Pro which they also provide it.
Presley –
thank you patient and professional recommended.
StanleyRhys –
excellent service my phone was totally Dead before using this service now its working like new